ADP1613ARMZ-R7 (ADI DC DC Switching Regulators) pin diagram and parameter introduction

Analog Devices' model ADP1613ARMZ-R7 is a DC DC Switching Regulators. It is a boost dc-to-dc switching converter with an integrated power switch that can provide an output voltage of up to 20V. With a package height of less than 1.1 mm, the ADP151AUJZ-3.3-R7 is ideal for space-constrained applications such as portable devices or thin film transistor LCD displays.

The ADP151AUJZ-3.3-R7 operates in current mode pulse width modulation (PWM) with up to 94% efficiency. Adjustable soft start prevents inrush current when the unit is activated. Pin-selectable switching frequency and PWM current mode architecture allow excellent transient response, easy noise filtering, and the use of small, cost-saving external inductors and capacitors. Other key features include undervoltage lockout, thermal shutdown and logic control enable. The ADP151AUJZ-3.3-R7 is available in a lead-free 8-lead MSOP.

Functional features of ADP1613ARMZ-R7

1. Adjustable output voltage: ADP1613ARMZ-R7 can adjust the output voltage through an external feedback resistor to meet different application requirements.

2. Wide input voltage range: ADP1613ARMZ-R7 is suitable for a wide range of input voltage, usually between 3V and 30V.

3. High efficiency and energy saving: ADP1613ARMZ-R7 adopts efficient power conversion technology to minimize energy loss and heat generation, thereby improving the overall energy efficiency of the system.

4. Built-in protection functions: ADP1613ARMZ-R7 has multiple built-in protection mechanisms, including overvoltage protection, overcurrent protection, overtemperature protection, etc., to ensure the safe operation of the system.

5. Fast dynamic response: ADP1613ARMZ-R7 has fast dynamic response characteristics and can quickly adjust the output voltage to adapt to load changes, thereby providing stable and reliable power output.

Application areas of ADP1613ARMZ-R7

ADP1613ARMZ-R7 has the features of adjustable output voltage, wide input voltage range, high efficiency and energy saving, built-in protection function and fast dynamic response. Its main application areas are as follows:

1. Portable electronic devices: ADP1613ARMZ-R7 has the characteristics of low quiescent current and high power efficiency, and is suitable for use in portable electronic devices, such as smartphones, tablets, handheld game consoles, etc.

2. Communication equipment: ADP1613ARMZ-R7 has the characteristics of fast response and can be used for power management and power supply stability in communication equipment. For example, wireless routers, mobile phone base stations, VoIP phones, etc.

3. Industrial control system: ADP1613ARMZ-R7 has the characteristics of low noise and high output stability, and is suitable for power supply of sensors, actuators and interface circuits in industrial control systems.

4. Medical equipment: ADP1613ARMZ-R7 is very suitable in providing stable power supply and meeting low noise requirements, and can be used for power management and signal processing of medical equipment.

ADP1613ARMZ-R7 parameters

Brand: Analog

Product Category: DC-DC power chip

Working temperature: -40℃~+125℃

Installation type: SMT

Package/casing: MSOP8_3X3MM

Topology: Boost, SEPIC

Switching frequency: 650KHz, 1.3MHz

Number of output terminals: 1

Output voltage: 2.5V~20V

Length x Width/Dimensions: 3.00 x 3.00mm

Output configuration: Positive

Function: Boost

Output type: Adjustable

Output current: 2A

Synchronous rectification: none

Height: 1.10mm

Number of pins: 8Pins

Certification information: RoHS

Storage temperature: -65℃~+150℃

Component life cycle: Active

ADP1613ARMZ-R7 pin diagram

Schematic diagram of ADP1613ARMZ-R7

If you need to purchase this model or want to know more information, please contact us via the following email:

• [email protected][email protected][email protected]